Wednesday, September 15, 2021

The Stack, The Arch, & More

Achievement unlocked: the stack is up! As is the arch. 


Tyler built the angle iron frame & laid the brick for the arch on Monday. Sadly I was not able to be here for that! Trying to work around my teaching schedule was going to delay construction, and I really really need a kiln. I have orders piling up! Anyway, I came home Monday night to a completed arch, with a blanket of insulating kaowool. We removed the form in the morning & laid a layer of Quikcrete. I had a brief moment of wishing I hadn't discarded the boxes of broken pottery bits I used to save, thinking one day I might make a mosaic! I decided a couple decades ago that I am probably not going to make a mosaic! & even if I wanted to, there are plenty of shards in the world. But I am kind of enjoying the sleekness of the plain concrete finish. If I change my mind I could always add another thin layer of concrete & lay buttons & mug handles & porcelain doll heads in that. 

We built the stack yesterday as well. There was a little design question to resolve: what material to use for the upper portion of the stack. Technically, to fire, the stack only needed to reach the top of the arch, because this kiln will utilize forced-air burners. (More on that later, but here's the scoop from Ward Burner on the differences.) But in order for the hot gas escaping the kiln to vent above the roof of the shed, the stack has to reach that high, and do so without creating a draw that would interfere with the firing. 
Options: a piece of culvert, elevated above the last brick layer to let air in (ugly, will need to be replaced every couple of years); a double-walled stainless steel tube, also elevated, made for kilns & such (less ugly, more durable but spendy - maybe $300 for a 3 foot length) or...hey, we've got all these brick! 
The stack could not be solid, like a conventional stack, because of the draw issue, but Tyler had an idea: we could build it in a checkerboard pattern, leaving gaps between the brick to pull in air. So that's what we did & it looks so cool! Can't wait to see it firing - I am hoping to see a bit of light thru the gaps. 

Next, the door, the burners, the plumbing - that last bit will be the hold up, since it will happen just whenever the propane tech can get here. 


If you'd like ot support this project or just want a great new mug, you can pre-order a mug from the first firing at this link


1 comment:

Michèle Hastings said...

Looks great! So exciting to see a new kiln being built.