Coffee Pour Over Cone

 I've resisted making these for a long time, because I figured like lots of specific-use items, there were some specs I didn't know, & wouldn't know until I went to use it. I didn't (& don't) have time right now to do the experimenting that would be necessary to make coffee pour-over cones that work well. 
But, then I got a jump start from my colleague at Portland Pottery: fellow instructor Brian Buckland. Brian had drawn this image on the whiteboard in our shared classroom: 

Brian makes these a lot - you can purchase one of his here & here, if you've been wanting one! or visit his studio in Buxton during the Maine Pottery Tour. Anyway, Brian is incredible generous with knowledge & information, & he filled in the last 2 pieces I needed: how much clay to start with (2 pounds) , & how big is the hole in the bottom (1/4 inch.) 

Here's my first attempt: 

I took a slightly different approach to the base - I gave the tray a little upward curve, thinking it would seat itself better on a wider range of mug widths. I think I will leave the outer surface of the try unglazed, to create a little more friction so it won't slip around while in use. I also made a more conventional one, with a flat tray at the bottom, but that still needs to be trimmed. Looking forward to testing out both of them, & maybe making more if they work out well - hopefully I will have one or two in the kiln I unload during the pottery tour. 

We get by with a little help from our friends!